This is a conductive plastic bag that has a very high antistatic effect.
General plastic film itself is an electrical insulator.
For that reason, the film has a behavior that holds the natural static inside.
Because of this behavior, the film sticks to dust and the static may badly affect the packed item.
This conductive plastic bag is used for solving those problems.
It’s possible to let the static go in the air momentarily because of the carbon with conductive properties being added to the film.
* We may not be able to manufacture your requested size depending on the combination of the thickness and the width.
After receiving your request, we will offer the best and closest option to what you requested.
The minimum customized production volume (lot) is 2,000m of bags in length.
To calculate how many pieces you get from that, divide 2,000 by the length of each bag (m).
E.g. If the bag is 0.05mm thick x 200mm in width x 300mm in length, 2000÷0.3= approx. 6,600 pieces.
Also, if the bag opening width is under 500mm, that is even less so we can manufacture from 1000m.
Of course, the higher the volume manufactured in one go, the cheaper the per unit cost of each bag, small production runs for tests are recommended.
1. Packing powders and liquids that may cause dust or liquid explosions when static is accumulated
It’s used as a photosensitizing agent too and used as a prevention of powder explosions and ultraviolet light (discolouration)
2. Used as a duct inside a material set inline in the powder manufacturing factory
Prevents powders from sticking inside because of the static that builds up from the friction between the particles.
3. It can be used for storing industrial waste and removing static by putting pulverised waste from the manufacturing of plastic molds in waste bags.
We can manage your requests concerning specific shapes of tubes, bags and sheets.
Please contact us if you need conductive plastic bags in the Philippines, Luzon and Manila.
